Several comparisons between European version of sp

Takeaway:Latest company news about Several comparisons between European version of split jaw crusher and one-piece jaw crusher

latest company news about Several comparisons between European version of split jaw crusher and one-piece jaw crusher  0European version of the jaw rupture, usually refers to the jaw rupture with a V-shaped cavity, and the difference from the traditional PE jaw rupture is the cavity type. Compared with the traditional half-V-cavity jaw crusher, the European version of the jaw crusher has the characteristics of the actual feed and the nominal feed, deep cavity, not easy to block or jump, large processing capacity, and high processing efficiency. Our company combines many years of professional manufacturing experience to develop and produce the European version of the RC series of jaw crushers. All the frames adopt a split structure, which has many advantages compared with the integrated one-piece frame.

The entire frame of the traditional monolithic frame is produced by casting or welding, which is relatively difficult to manufacture and transport, especially not suitable for large jaw crushers. The split structure frame adopts a modular, non-welded frame structure. The split frame can be divided into front wall panels, rear wall panels and side panels. The weight of a single part is light, and the tonnage required for traveling is also small. The height of the pillars, support beams, and plant buildings of the plant is relatively low. Moreover, it is convenient to disassemble, install and transport, especially suitable for different working conditions, and can be used for uphill and downhole.

Compared with the traditional overall rack, the split rack can be separated and independently processed synchronously because of its large parts. It is not affected by the upper and lower processes in the production cycle, and can also meet the customer's demand for stocking time. Compared with the whole rack, if the split machine has a rack problem (the probability of this problem is extremely low), it is not necessary to replace the whole rack, just replace the problematic one.latest company news about Several comparisons between European version of split jaw crusher and one-piece jaw crusher  1

Our company's RC series split jaw crusher adopts the integrated installation of the motor and the host. The motor of the traditional jaw crusher is installed on the motor frame of the slide rail structure, and the frame is then installed on the foundation of the concrete or steel structure. In this structure, the triangle belt is tensioned by moving the motor on the slide rail, which needs to be installed and debugged on-site, and the motor needs to occupy a larger installation space. The motor is installed in one piece and does not need to be installed at the user's site, so the crusher is easier to install and reduces the cost of equipment foundation construction. The V-belt is easier to tension, there is no relative movement of the host motor, and the service life of the driving V-belt is longer.

The use of standard tape wheel guards and flywheel guards avoids the problem that users do not install the protective cover due to ignoring safe work at the use site, and the equipment is safer to use.